Follow our step-by-step instructions or watch our video of how to apply and remove your peel and stick wallpaper here.
Yes! NuWallpaper is completely removable and safe to use in rentals (and other spaces) without damaging walls.
If you follow our step-by-step instructions when applying your peel and stick wallpaper, then it has the ability to last as long as you would like it to!
As long as you follow the proper directions for installation and it is not being directly hit with water, then you should have no problems installing NuWallpaper in your bathroom or behind a kitchen sink. If installed in a bathroom with a shower, we recommend taking care to smooth out any air bubbles that may occur during installation.
NuWallpaper works best on smooth, flat surfaces. We do not recommend installing NuWallpaper on
We recommend ordering a sample to test before ordering and installing rolls, as you would be installing NuWallpaper at your own risk over any non-smooth/flat surface.
Yes, as long as you follow the instructions for proper installation and your ceiling is smooth, flat, dry and clean, NuWallpaper will adhere.
NuWallpaper can be used to decorate a wide variety of surfaces including:
If a surface is smooth, flat, dry and clean, and is not a non-stick surface, NuWallpaper should adhere.
NuWallpaper should be placed at least 15 in (38 cm) or more from a stove, fireplace, or other heart source to avoid exposure of product to heat.
After a fresh coat of paint has been applied, you should wait 30-60 days before applying NuWallpaper. This allows the paint to fully cure, ensuring that NuWallpaper will not damage the paint when it is removed.
If you need to clean your NuWallpaper, simply wipe with a damp cloth. No need for chemical cleaners or abrasives, which could damage the product.
NuWallpaper was designed for indoor use only. We do not recommend using NuWallpaper outside as it may begin to fade and peel.
Yes, you can absolutely hang artwork on your wall after installing, just keep in mind that using a nail or hook will put a hole in the wallpaper.
If using a command hook, we recommend cutting a hole in your NuWallpaper so the command hook will adhere directly to the wall.
NuWallpaper is printed on a premium peel and stick vinyl substrate.
NuWallpaper is VOC, PVC, phthalate, and formaldehyde free.
Yes, you can purchase a sample on our website by selecting "Sample - 8-in x 10-in" in the item dropdown menu and add to your cart.
No. Unless the RV is temperature controlled year-round, NuWallpaper will likely fail due to expansion and shrinkage from seasonal temperature fluctuation.
To be durable enough to withstand foot traffic, FloorPops were designed with a strong adhesive. This means that they are NOT removable in the sense that our peel and stick NuWallpaper or wall decals are removable/temporary. They can, however, be removed should you choose to- we recommend using a scraper or an object with a thin, flat surface to wiggle under a seam and pop a corner of the tile up. From there you should be able to peel off the tile with your hands. Please note that as the adhesive is strong, if installed on a painted surface FloorPops are likely to lift the paint. It is also possible that some adhesive residue may be left behind when FloorPops are removed.
You may find a slight variation in design match from tile to tile. This variation should not affect the overall look of your floor. Be sure to rotate tiles for best look.
FloorPops are 0.06 inches thick (they are 3D, not flat decals).
We do not recommend installing over grouted tiles or floating wood laminate, as the base layer would not be secure. If you choose to install over ceramic or grouted tiles, we recommend filling all grout lines with thin-set tile mortar before installing FloorPops over existing tiles to create a flat, smooth surface.
Yes! Subfloors and underlayment make the perfect base layer for optimal tile adhesion. For additional adhesive strength, treat the installation surface with a latex primer.
We do not recommend installing Floor Tiles over linoleum.
We do not recommend installing FloorPops over floating laminate.
FloorPops are water resistant. Allow 5 days after installation before cleaning, but once those 5 days have passed you can sweep, mop, vacuum or dust away! For best results, use a vinyl floor cleaner and do not clean with an excessive amount of water.
We do not recommend installing FloorPops on walls.
FloorPops are REACH and FloorScore certified, and fully compliant with California Proposition 65.
FloorPops are fire-resistant to 80°C / 176°F. They are not to be used on radiant heated floors.
Due to fire hazard, we do not recommend installing FloorPops around a working fireplace.
Each pack of FloorPops contains 10 tiles and covers 10 square feet.
We recommend a utility knife and straight edge, but they are easy to trim with scissors as well!
FloorPops have a low luster finish and a light texture for traction purposes.
FloorPops are designed for interior use only.
No. Unless the RV is temperature controlled year-round the tiles will likely fail due to expansion and shrinkage from seasonal temperature fluctuation
We are always looking to expand on successful product lines- due to the overwhelmingly positive response from customers, we are beginning the design process of future additions to the FloorPops collection!
One pack of InHome brand tiles contains four 10-in x 10-in sheets.
No- while they are water-resistant, they are not waterproof and are not designed to be placed in a shower.
The tiles are water-resistant, but not waterproof. This means that being occasionally splashed with water, ie from the sink or spills, is fine, but constant exposure to water (like in a shower) is not.
Yes, the tiles are 3D and designed to look just like real tiles. They are raised a bit above the "grout" lines.
The tiles can be removed by peeling off, however, they are meant to be a more permanent design solution in order to hold up to the rigors of a busy home. This means that they have a stronger adhesive than our decals and NuWallpaper, and so could potentially take a bit of paint off a wall when removed.
Yes! They are perfect for covering up dated or just-not-your-style tiles.
Yes, but if placed near a stove without a backing, please leave 15 inches (38 cm) of space or more above the range to avoid exposure to extreme heat.
No, they are not meant to be placed directly on a heat source. However, if it is a faux fireplace that is not in use, that is fine!
Measure the width x height of the areas you are looking to cover in feet (for non-continuous spaces, like around a stove or cabinet, you may need to measure each space separately and add together). Each pack covers about 2.77 square feet, so you would divide that total square footage by 2.77 to get the minimum number of packs needed. As there is a pattern match to take into account of sticking each tile sheet next to each other, we recommend ordering a few extra packs to compensate for the pattern match.
Yes, wipe down with a damp paper towel or cloth.
Our tiles are easy to install! Watch a step-by-step video of how to install our tiles:
Yes, they are easily trimmable with a utility knife or scissors.
No, they are not designed to be used on a floor. For that, we recommend FloorPops!
Yes! WallPops can be removed and repositioned over and over again without damaging your walls and without losing their ability to stick. They are perfect for decorating dorms, apartments, or any other rental unit.
Yes, absolutely! WallPops are re-usable, removable and repositionable. To reposition WallPops, simply peel them off the wall and smooth onto a new location.
To transport WallPops to a new dorm, apartment, or home, remove slowly from the top down and stick onto the original backing sheet. If you forgot to save the backing, you can also use wax paper or a vinyl shower liner. This will protect the adhesive and keep the WallPops from creasing during transport. Don't fold your WallPops, as this can cause creases. If needed, you can roll them instead.
As long as WallPops are not getting directly sprayed with water, WallPops are a great addition to any bathroom wall!
WallPops work best on smooth, flat surfaces.
However, WallPops can still be successfully installed on textured walls if they are not excessively porous or uneven. We have had customers use WallPops successfully on a variety of surfaces. They stick best to painted surfaces, so if you are trying to stick WallPops to knock-down texture walls, concrete, or raw wood, you will have more success if the surface has been painted. In general, WallPops stick great to tiles, mirrors, glass, and wallpaper.
WallPops can be used to decorate a wide variety of surfaces including:
If a surface is smooth, flat, dry and clean, and is not a non-stick surface, WallPops should adhere.
WallPops should be placed at least 15 in (38 cm) or more from a stove, fireplace, or other heart source to avoid exposure of product to heat.
After a fresh coat of paint has been applied, you should wait 3 - 4 weeks before applying WallPops. This allows the paint to fully cure, ensuring that the wall decal will not damage the paint or leave an area of varied color underneath when it is removed.
If you need to clean your WallPops, simply wipe with a damp cloth. No need for chemical cleaners or abrasives, which could damage WallPops.
We do not recommend using WallPops outside or on cars. While they may work well for a short time, WallPops were not designed for outdoor use and may begin to fade and peel.
WallPops are VOC, PVC, and formaldehyde free.
If you are interested in becoming a WallPops retailer, please go to our contact page, e-mail us at email@example.com or call us at 781-963-4800 for details.
Give us a call at 781-963-4800 or e-mail us at firstname.lastname@example.org