How to Install Window Film
Follow our step-by-step instructions of how to apply static cling and self adhesive privacy film or watch our easy to follow video. Printable instructions are also available.
Step 1
Clean and Dry Your Glass Surface
- Using glass cleaner, thoroughly clean your window, door, or sidelight
- Wipe your glass surface dry using paper towels
Surface must be sprayed with water for both static cling and self-adhesive window film
Step 2
Spray Glass Surface with Water
- Spray glass surface with water
- Ensure surface is thoroughly wet
Surface must be sprayed with water for both static cling and self-adhesive window film
Step 3
Remove Backing and Apply to Glass
- Begin to remove window film's protective backing
- Apply window film to glass starting at the top
- Slowly remove backing and smooth film onto the glass with your hand
Tip: Use a piece of tape to help remove the protective backing if backing is semi-transparent or gives you difficulties with peeling off
Step 4
Smooth Out Air Bubbles and Trim Excess
- Using a squeegee, smooth out any air bubbles in the film
- Use a craft knife to trim any excess
- Alternatively, measure and precut window film to desired size
